Where do I get the Signal-to-Noise Ratio (SNR) required to finish commissioning a site and after I obtained the confirmation number?

Installation

11. Where do I get the Signal-to-Noise Ratio (SNR) required to finish commissioning a site and after I obtained the confirmation number?

During the commissioning process, after alignment criteria has been met and once you receive a confirmation number, CVACS will prompt you to obtain the Signal-to-Noise Ratio (SNR) to complete the commissioning process. You obtain the SNR by right clicking on the Mission Control icon [located on the system tray], select Network Status, select Advanced, and the SNR will be displayed in the Signal Quality Box. A minimum reading of 4.5db is required.